ABUS PR 2700 reinforced bolt

The ABUS PR 2700 reinforced bolt completely secures inward-opening doors with widths of 735 to 1030 mm. Regardless of whether the doors are made from wood, metal or uPVC. The ABUSPR2700 reinforced bolt not only secures the door on the lock side, but also on the hinge side, thus offering optimal resistance in the event of forced break-in attempts. Of course, the ABUSPR2700 can be operated from both inside and outside, and is particularly quiet due to its special drive components. In addition, the cylinder for the lock can be exchanged in order to integrate it perfectly into already installed locking systems. The standard version of the ABUSPR 2700 comes with the following parts:

• Anti-pulling rosette
• ABUS Pfaffenhain cylinder (30/60)
• Attachment material

The bolt can be individually adjusted so that it is suitable for both left and right opening doors.

The PR2700 reinforced bolt from ABUS therefore always closes in the same direction as the existing door cylinder.

It is also possible to adjust the position in which the key should be removed.

The ABUS PR 2700 reinforced lock isVdS -approved for door cylinder withVdS class A or higher.

The lock cases anchored in the masonry ensure optimum security, as the reinforced bolt engages firmly in them on both sides.

For optimal use of the ABUS reinforced bolt, it should be installed below the door fitting. Ideally at a height that is easy to reach.

Fully customised

The reinforced bolt from ABUS has a one-key system alike to other ABUS padlocks and door cylinders, and can therefore be ideally integrated into the entire security system. PWA 2700 W wall anchoring is also available for optimal wall enclosure. Furthermore, the reinforced bolt lock with the PA 1018 accessories can be expanded so that it can also be used as break-in protection for outward-opening doors. The ABUS PR2700 reinforced bolt is available in the colours brown, silver, white and white-chrome, and therefore adapts well to any setting.